wdlinux_ Graphic tutorial for server installation of LNMP

Time:2021-11-24

LNMP is the abbreviation of Linux + nginx + MySQL + PHP, that is, the integrated environment of LNMP. After the system is installed, even LNMP is installed
wdlinux_ LNMP is a final level integration package, as well as wdlinux_ Lamp
See morehttp://www.wdlinux.cn/wdlinux_CentOS_5.5
The following two are video tutorials for this tutorial
http://v.youku.com/v_show/id_XMjA1NzIyNDE2.html  (video)
http://www.56.com/u16/v_NTQ4MjI1MDk.html  (video)

This article assumes that VMS are installed and set, and ISO files are downloaded, as shown in the following figure

Note that during the installation of lamp and LNMP, the hard disk space must be at least 30g, and the base version is not required
Then click start this virtual machine on the left to start the installation


Select Yes to start setting IP information, such as IP address, gateway, etc


1. The network card is activated with the system startup
2 enable IPv4 support
3 enable IPv6 support
Both 1 and 2 are necessary. 3 depending on your personal situation, IPv6 is rarely used now, and basically not used


1 is to obtain IP dynamically. If there is a DHCP server in the office domain name, this option is optional
2. For common IP address configuration, IP address and subnet mask shall be specified


Gateway and primary DNS, secondary DNS


Set host name


The password of root user is also the password of super management
The default system management user name of Linux / Unix is root, such as administrator of win system
The password is set here
Once the system is installed, you can passsshTo connect remotely


When you see this prompt, congratulations. It means that the system has been successfully installed. Just press enter and restart


Seeing the above prompt indicates that the system has successfully started and is waiting for your login


Enter the user name: root and password, and press enter (note that the password here will not be displayed. Do not think it is jammed. Just press enter after entering. If the password is wrong, you will be prompted to log in again)
The password is the root password set during the installation just now
If you see the above [root @ hostname ~]# description, the login is successful


useifconfigView next IP

More about SSH management and operation will be discussed later

Now open it with ie, and the following prompt will appear

Including phpinfo information, PHP probe, phpMyAdmin (MySQL manager)


The management password for logging in to MySQL. The default user password is: root, wdlinux.cn
The default administrative user of MySQL is also root, but the root here has the same name and different person as the root of the above system, that is, it is irrelevant. After logging in, it is shown in the figure below

More about the operation of phpMyAdmin will be discussed later


From this phpinfo, you can see that after the system is installed, it supports Zend, eaccelerator and other accelerators by default

FTP
After installing the system, a wdlinux user is opened by default, and the password is wdlinux.cn
Now log in with FTP software

Click Connect and the following content will appear, which indicates that the FTP connection is successful and you can upload, delete and other operations

At this point, the entire system setup has been completed
You can upload forums, DZ, phpwind, dedecms and other open source programs to install websites

How to modify the user name and password, how to create a new FTP user, and how to bind the host and domain name will be discussed later
For VM installation and settings, seehttp://www.wdlinux.cn/doc/VM.mht

Recommended Today

Apache sqoop

Source: dark horse big data 1.png From the standpoint of Apache, data flow can be divided into data import and export: Import: data import. RDBMS—–>Hadoop Export: data export. Hadoop—->RDBMS 1.2 sqoop installation The prerequisite for installing sqoop is that you already have a Java and Hadoop environment. Latest stable version: 1.4.6 Download the sqoop installation […]