The solution to the failure to use the up and down keys of the keyboard to select the menu after the computer starts up and enters the boot interface

Time:2022-5-4

Cause analysis:

After starting the computer, you may need to select the computer system to enter in the boot interface. If the USB keyboard device is not automatically loaded after startup in the BIOS, you may not be able to use the up and down keys to select the menu in the problem.

After the computer starts up and enters the boot interface, it is unable to use the up and down keys of the keyboard to select the menu. Solution:

1. After power on, press del or F2 to enter BIOS (CMOS) setting;

电脑开机进入引导界面后无法用键盘上下键选择菜单怎么办1

2. Find integrated peripherals;

电脑开机进入引导界面后无法用键盘上下键选择菜单怎么办2

3. Set USB keyboard support to “enabled”;

电脑开机进入引导界面后无法用键盘上下键选择菜单怎么办3

4. Press F10 to save.

The above is the introduction of the solution to the problem that you can’t use the up and down keys of the keyboard to select the menu after the computer starts up and enters the boot interface. Friends with the same problem can try to solve it.