1、 Turn on Shh function of Qunhui
2、 Use Shh tool to log in to Qunhui (you need to open the SHH of Qunhui). I use putty tool, which is better than Qunhui’s own tool.
3、 Enter the user name and password to log in
4、 Get root permission
Input: Command sudo – I
5、 To get the root permission, you need to re-enter the previous login password
It’s like this after success
6、 Through the command line online download network cloud wear client program to Qunhui
Note: we need to distinguish the CPU. The CPU of arm is different from that of Intel.
ARM CPU input command:
Other CPU input commands:
7、 Configure in the network cloud crossing console
Fill in the port of Qunhui for intranet port: 5000 (default value), and select TCP for protocol. After the configuration is completed, the token is found, copied and recorded
8、 Give executable permission to the downloaded program
chmod -R 777 ./wyc_linux_arm
Other CPU commands:
chmod -R 777 ./wyc_linux_64
9、 Let net cloud wear can start automatically, the author is Linux Xiaobai for a long time, tried to add in Qunhui’s task plan, has been unsuccessful. Finally, find a relatively simple way to modify the Linux boot mode.
(1) Enter the command: VI / etc / RC in Shh tool
The results are as follows
Use the page turning or direction key to locate the penultimate line (the last line is exit 0), as shown in the figure:
(2) Add two lines of code before the last line:
nohup ./wyc_ linux_ Arm – token = token&
(3) Press the “ESC” key on the keyboard to exit the editing mode.
(4) Enter “: WQ”. After entering, you will exit completely and return to the root initial interface.
After completion, as shown in the figure:
It’s a great success. Restart Qunhui to have a try. Is it possible to connect your own Qunhui through netcloud!