How to set up wired network connection between MAC dual system and virtual machine

Time:2019-9-16

Many small partners with Apple laptops may not be accustomed to their systems, or work requires that Windows be installed in Apple laptops, including dual systems and virtual machines. As you know, Apple notebooks have no Internet interface, which makes it impossible to use them smoothly without WiFi or poor WiFi signal. Today, Xiaobian teaches you how to set up the cable network connection of the Apple notebook.
As you know, Apple notebooks have no Internet interface, which makes it impossible to use them smoothly without WiFi or poor WiFi signal.
Whether it’s a dual system or a virtual machine, connecting to a wired network requires an external network card converter, which converts the network interface into a USB interface, and you can buy the converter online or in the electronic market.

 
  1. Connection method of wired network in dual-system environment.
It is relatively simple to set up a wired network connection under the dual system, which can drive people’s life. Download and install Drive Life on Drive Life Official Website. Open the software.
If you insert the adapter into the computer, the computer will not recognize the mobile device, but don’t panic. Turn on the peripheral driver that drives life and find the adapter. At this time, the converter driver shows that it is not installed. Click Installation, and the driver will be able to install the wireless network card driver successfully in 20 seconds.
After the installation of the adapter driver is successful, you just need to wait for the computer to automatically connect to the wired network. The connection process may last 2-3 minutes. Please wait patiently. If the connection fails, open the drive clinic that drives life and find engineers online remotely.

  2. Connection method of wired network in virtual machine environment.
If you set up a wired network connection in a virtual machine environment, you can’t drive your life. Because the virtual machine itself is self-driven, there is no need to install and update. Installing or updating drivers in a virtual machine environment can have adverse consequences! Please keep in mind. Therefore, it can only be set from the MAC system.
First, you need to access the official website of the manufacturer of the network card converter. Usually, the converter manufacturer will provide the MAC driver download on the official website. You find the corresponding MAC driver of the converter you buy, and install the driver under the MAC system according to the steps provided by the manufacturer.
Secondly, insert the network card converter connected to the network cable into the computer and turn on the system preference settings-network options of the mac.

Thirdly, set up the interface and add network connection in the network. To create a network with the network card as the interface, it is worth noting that WiFi and wired network can not be used simultaneously! When creating wired network, please close WiFi. The specific operation process refers to the tutorial provided by the network card converter manufacturer, because the setup process of each network card converter is somewhat different.
After successful installation, Mac and virtual machine will be able to go online happily!

The above content is a method of setting up wired network connection between MAC dual system and virtual machine shared by developpaer editor. I hope it will be helpful to you. At the same time, I thank you for your support to developpaer website. Thank you.